Braille Signs

Our range of Braille pictograms have been moulded from a single piece of polycarbonate. The braille and tactile elements are all raised so that they comply with the building code and the print is on the reverse side of the sign face, preventing it from being scratched off. Being a fully moulded sign none of the braille or raised elements will fall off. This is a major advantage over traditional braille signs which have individual braille and tactile elements glued to the face.

The moulded Sign plate is mounted to semi rigid polyethylene plastic backing plate. Signs are supplied with 3m- 467MP double sided tape applied to 100% of the sign back, ready for installation. The signs are suitable to be applied directly to flat surfaces such as gyprock, painted timber, glass etc.

If the signs are to be mounted onto brickwork or heavily textured surfaces, they can be supplied mounted to an aluminium plate, making the sign completely rigid.


Safety Sign legible viewing distance guide
Signs should be large enough to view without straining the eyes when communicating safety messages to employees and/or visitors. Therefore, choosing the size of a sign is more than fitting it to the space you have available. In order to comply with AS 1319, you must consider the environment, lighting and viewing distance – these factors will determine the size of sign required to suit your application. The recommended minimum sizes as per AS 1319 are as follow. For a pictogram and worded sign in a factory or work environment, where lighting is good and the sign will be mounted in a reasonably prominent position:
Safety Sign Comparison Chart